SEEKING QUOTES FOR EQUIPMENT

SEEKING QUOTES

Two (2) Barge Moving Winch-Minimum 40,000 lbs continuous line pull • Back Tensioner •
Drum capable of holding a minimum 800’ of synthetic rope, for the necessary diameter • Electric Motors, 460V • Base is to be floor/ground mounted

One (1) Local Operating Station-Separate console from control panel • Nema 4x rated enclosure • Auto/Manual Selection • Manual Winch 1: Pull-in/pay-out, Hold in position • Manual Winch 2: Pull-in/ pay-out, Hold in position • Auto move: Up-river/Down-river, Hold in position • Adjustable Speed Control • Adjustable Tension Control • E-Stop

One (1) Control Panel-Nema 4x Enclosure • Necessary Starters/VFDs for both winches • 460 Main Power • Necessary Transformer and/or Power supplies • System logic to control all drive and tension controls • Capability to operate each winch individually in a “Manual Mode” • Capability to operate winches in a “Closed Loop” system, in conjunction with one another in an “Auto Mode” • Exterior Door Mounted E-Stop • Exterior Door mounted VFD Remote, for each drive • Keypad and Screen • Wireless receiver for remote control

Two (2) Swivel Head Fairleads-Sheaves to accept the necessary synthetic rope diameter • Entry/Exit line height to be between 18-36” above base • Base to be floor/ground mounted

Two (2) Horizontal Fairleads-Sheaves to accept the necessary synthetic rope diameter • Entry/Exit line height to be between 18-36” above base • Base to be floor/ground mounted

Two (2) Wireless Remote Control-On/off • E-Stop • Auto Up-River • Auto Down-River • Winch 1 Manual pull-in • Winch 1 Manual pay-out • Winch 2 Manual pull-in • Winch 2 Manual pay-out

Two (2) 700’ Synthetic Rope-Minimum 1-1/8” diameter • Jacketed • Eye on one end • Installed on winch drum

Quotes will be accepted until 5pm CST on January 2 2026.