C&C Marine & Repair News - Page 3 of 4

C&C Marine & Repair Acquires Fabrication Building —photo courtesy of C&C Marine & Repair New 35,000-square-foot fabrication building comes equipped with four 40-ton overhead gantry cranes. (Photo courtesy of C&C Marine & Repair)

—photo courtesy of C&C Marine & Repair New 35,000-square-foot fabrication building comes equipped with four 40-ton overhead gantry cranes. (Photo courtesy of C&C Marine & Repair)

C&C Marine & Repair Acquires Fabrication Building

May 22, 2020

C&C Marine & Repair, a Belle Chasse, La.-based full-service marine fabrication and repair shipyard located along the Gulf Intracoastal Waterway, announced May 20 the acquisition of a 35,000-square-foot fabrication building… Read More

C&C Completes Fifth 6,600 Hp. Towboat For Marquette Transportation Marquette Transportation offered C&C Marine & Repair the opportunity to name the last vessel of a five-boat series that C&C built for Marquette. The vessel will carry the name of Randy Mauer, C&C’s manager of boatbuilding. (Photo courtesy of C&C Marine & Repair)

Marquette Transportation offered C&C Marine & Repair the opportunity to name the last vessel of a five-boat series that C&C built for Marquette. The vessel will carry the name of Randy Mauer, C&C’s manager of boatbuilding. (Photo courtesy of C&C Marine & Repair)

C&C Completes Fifth 6,600 Hp. Towboat For Marquette Transportation

May 8, 2020

In March, C&C Marine & Repair, a Belle Chasse, La.-based full-service marine fabrication and repair shipyard, wrapped up construction on the fifth and final boat in a series of 6,600… Read More

Callan Marine’s New Dredge Starts Work In The Gulf Coast New dredge has 24,000 hp. and a 31.5-inch pipeline diameter.

Callan Marine’s New Dredge Starts Work In The Gulf Coast

May 5, 2020

The U.S. dredging industry’s newest cutter suction dredge, Callan Marine’s General MacArthur, went to work in April for a private client in the Port Arthur/Beaumont, Texas, area. The dredge with… Read More

Callan Marine’s New Dredge Starts Work In The Gulf Coast New dredge has 24,000 hp. and a 31.5-inch pipeline diameter.

Callan Marine’s New Dredge Starts Work In The Gulf Coast

May 1, 2020

The U.S. dredging industry’s newest cutter suction dredge, Callan Marine’s General MacArthur, went to work in April for a private client in the Port Arthur/Beaumont, Texas, area. The dredge with… Read More

24 Small Shipyards Garner $19.6 Million In Grants From MarAd

April 24, 2020

U.S. Secretary of Transportation Elaine Chao announced April 20 the award of $19.6 million from the U.S. Department of Transportation’s Maritime Administration (MarAd) through the Small Shipyard Grant Program. Twenty-four… Read More

Corps Awards Contract For Phase 2 Of Corpus Christi Channel Improvement

April 10, 2020

The Port of Corpus Christi has announced that the U.S. Army Corps of Engineers on April 8 awarded a $97.9 million contract to Texas-based Callan Marine Ltd. for completion of… Read More

Callan Marine Launches New Cutter Dredge MacArthur The newly launched barge tied up at a C&C Marine dock. (Photo courtesy of Callan Marine)

Callan Marine Launches New Cutter Dredge MacArthur

November 22, 2019

The barge hull of Callan Marine’s new cutterhead dredge General MacArthur was launched on November 6 at C&C Marine and Repair in Belle Chasse, La. Callan executives Maxie McGuire, president;… Read More

C&C Marine & Repair Blasts 100th Barge In New Facility Freshly blasted barge goes into the paint facility.

C&C Marine & Repair Blasts 100th Barge In New Facility

August 23, 2019

Only nine months ago, C&C Marine & Repair, the Belle Chasse, La.-based shipyard located on the Gulf Intracoastal Waterway between the Harvey Canal and Algiers Lock, opened its groundbreaking robotic… Read More

C&C Marine & Repair Delivers Mv. Mendota The mv. Mendota has 2,013 hp. from three Caterpillar C18 ACERT diesels.

C&C Marine & Repair Delivers Mv. Mendota

June 21, 2019

C&C Marine & Repair, Belle Chasse, La., recently delivered the 2,013 hp. mv. Mendota to Upper River Services LLC. The new 76- by 30- by 9-foot, triple-screw towboat is the… Read More

C&C Places Superstructure On Forthcoming Weeks Dredge McKinney Salvage & Heavy Lift derrick barges move dredge superstructure onto hull. (Photo courtesy of C&C Marine & Repair)

McKinney Salvage & Heavy Lift derrick barges move dredge superstructure onto hull. (Photo courtesy of C&C Marine & Repair)

C&C Places Superstructure On Forthcoming Weeks Dredge

November 30, 2018

Weeks Marine’s new $60 million cutter suction dredge, the JS Chatry, under construction at C&C Marine & Repair in Belle Chasse, La., reached a major milestone November 27 when the… Read More